top of page

MANIFOLD CUSTOM FIRMWARE

Take advantage of Manifold firmware to increase hashrate and improve efficiency on virtually any popular ASIC miner model

Antminer X19

S19, S19 Pro, S19J, S19J Pro, ...

Whatsminer M50/M50S

M50S, M50, etc.

Antminer X17

S17, S17+, S17 Pro, T17, T17+

Whatsminer M30/M30S

M30S, M30, M31S, M32, etc.

Antminer X9/L3

S9, S9i, S9k, T9+, L3, L3+, L3++

Whatsminer M20/M20S

M20, M20S, M21S, etc.

BITMAIN FIRMWARE

  • Improved hashrate modes - On average an increase of 20%+ can be expected for Antminer S9 and 40%+ for Antminer 17 and 19 series. Even greater hashrate performance is possible with overclocking PSUs and immersion cooling. 

  • Improved efficiency modes - Allows for more aggressive efficiency modes that can improve j/th by as much as 30% over Bitmain firmware.

  • Per-chip Tuning - Improve power efficiency by tuning each ASIC chip individually. This can yield to a 20% hashrate increase without any loss of efficiency at all.

  • Profitability Control - Both overclocking for hashrate increase and undervolting for efficiency increase are supported on all Bitmain firmware versions.

  • Easy to use - Select a target hashrate and the firmware will take care of all details.

  • More flexible than stock firmware - Allows manual tuning and a variety of additional configuration settings.

  • Auto antivirus - prevents and recovers from virus attacks. Full control over SSH on 9 and 17 series miners.

  • Full Immersion cooling support - No need for expensive fan spoofers.

WHATSMINER FIRMWARE

  •  Improved hashrate performance - On average an increase of 10-20%+ can be expected for all Whatsminer models with stock power supplies. Up to 40% hashrate increase when used with overclocking PSUs.

  • Improved efficiency modes - Allows for more aggressive efficiency modes that can improve j/th by as much as 30% over stock firmware.

  • Ready to use profiles - Select a target hashrate and the firmware will take care of all details. Not available for all models.

  • More flexible than stock firmware - Allows manual tuning and a variety of additional configuration settings.

  • Full Immersion cooling support - no need for expensive fan spoofers on miners or the PSU!

  • Simple install process - The standard Whatsminer tool can be used to install the custom firmware.

  • Fully Automated Monitoring - Monitor your miners or adjust settings from anywhere in the world using an easy to use, secure, and modernized online interface.

  • Automated Notifications - Receive critical status notifications straight to your email or telegram account. Whether it's high temperature, a change in hashrate, or a miner going offline, you'll effortlessly know the moment something needs your attention.

  • Statistics - See useful statistics and data for your entire mining farm in one place. See trends in hashrate, power, and temperature for your entire mining operation all in one place.

 

Image by Alexander Shatov

Need Help?

Join our Discord for help with custom firmware setup and installation. 

bottom of page